Alkali-metal Na Adsorption and Promoted Oxidation on Si(100)2×1 Surface

The alkali-metal Na adsorption on Si(100)2×1 surface and its promoted oxidation and Si oxidegrowth have been investigated by means of thermal desorption,work function,Auger electronspectroscopy and photoemission electron spectroscopy.The experimental data showed that therewas a new state,interface electron state,near the Fermi level after the deposition of Na atoms.It wasfound that the presence of Na always caused an increase of the oxygen initial uptake whereas thepromotion of Si oxide growth was observed only at the coverage of Na greater than 0.5 ML.A newmechanism of Na-promoted Si oxide growth is suggested in this paper.     

中央电视台第一个数字化演播室视频系统介绍

数字电视系统在提高图像质量方面已显示出极大的优越性。因此，世界各国电视台都已开始数字化的进程，中国也不例外。本文详细介绍了中央电视台第一个数字化演播室－８００ｍ＾２演播室的视频系统，包括视频系统数字信号格式的确定，主要设备的特点以及演播室数字视频系统的主要特点等，供广大同行参考。     

离子注入对Cr12MoV钢表面组织结构和力学性能的影响

研究了Ｃｒ１２ＭｏＶ钢离子注入层的显微组织特征及其对表面性能的影响。结果表明，离子注入使Ｃｒ１２ＭｏＶ钢的表面硬度和耐磨性能得到显著改善，且存在着一个最佳的注入剂量，约为３×１０＾１＾７Ｎ＾＋／ｃｍ＾２左右。离了注入在Ｃｒ１２ＭｏＶ钢表面层中形成了大量细小弥散的第二相粒子，并使α－Ｆｅ晶格发生严重畸变，从而引起材料表面强化。     

微机对调制信号的包络解调

应用检相原理，可以提取有限长度调制信号和包络解调。通过改变Ａ／Ｄ转换器的位数，提高检相分辨率，它与检测对象的速度无关。这为提高检相分辨率展示了新的途径。     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

A Survey of Inverse Surface Design From Light Transport Behavior Specification

Inverse surface design problems from light transport behavior specification usually represent extremely complex and costly processes, but their importance is well known. In particular, they are very interesting for lighting and luminaire design, in which it is usually difficult to test design decisions on a physical model in order to avoid costly mistakes. In this survey, we present the main ideas behind these kinds of problems, characterize them, and summarize existing work in the area, revealing problems that remain open and possible areas of further research.     

Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals

A vibration-acoustic method for diagnostics and monitoring of production processes such as cutting metals makes it possible compared with other methods to reduce the requirement for measuring equipment and it provides a computer representation of the results observed. The set of equipment suggested has low cost and it exhibits considerable flexibility compared with existing equipment. __________ Translated from Izmeritel’naya Tekhnika, No. 7, pp. 30–34, July, 2006.     

有机发光显示的几项新技术

有机发光显示(OLED)作为下一代显示器倍受关注。本文简要介绍OLED显示器的几项新技术和制作方法，以及其研究现状和今后的发展趋势。     

RSFM网络及其在信号滤波中的应用

介绍了一种适用于模式识别的新型神经网络模型--局部有监督特征映射（Reglonal Supervised Feature Mapping,RSFM）网络,描述了该网络的拓扑结构和学习算法,研究了网络的基本性能,最后将其应用到了信号滤波中.理论研究和仿真实验表明,该网络结构简单、算法简洁,收敛速度快、识别精度高,适用于需要大样本训练、随机干扰严重的复杂模式的分类与识别.     

Measurement of the Metal Surface Acidity/Electronegativity of Pt(110)

In previous work, it has been found that a hydrogen-covered Pt(110) surface is acidic, but quantification of the acidity has not yet been done. In this paper a spectroscopic method is developed to measure the acidity of a metal surface for the first time. The technique involves measuring the intensity of the N–H stretch from the C₅H₄XNH⁺ that forms when hydrogen coadsorbs with pyridine, 2-fluoropyridine and 3-fluoropyridine. The Bethe approximation is then used to estimate the metal surface acidity/electronegativity (MSAEL). The proton affinity/MSAEL of Pt(110) has been determined to be 907 ± 4 kJ/mol at high coverage. This is the first time the MSAEL has been measured on a metal surface. Implications for fuel cell catalysis are discussed.